What stud length do I need with a MTHFTLC-*SK part?
Best is to use an example.
For instance, you have a panel thickness P of 2.5mm and a frame thickness of 1.5mm.
What stud length do I need with a MTHFTLC-*SK part?
Best is to use an example.
For instance, you have a panel thickness P of 2.5mm and a frame thickness of 1.5mm.
What's the correct part number MTHRPM22A or MTHRPM25A?
MTHRPM22A was an error in our old catalog.
Yes, we have LN29711 parts available, however we consult to buy the alternative ROHS zinc plated version instead of the Cadmium plated version.
Pricing is also way higher of the Cadmium plated versions.
Here you see an installed wing head stud MTHTLW-1S on an electrical circuit board.
Can Turnlock provide the SK27S3-*S parts?
Turnlock can provide the MTHFTLC-*SK parts.
It has the same mechanical and dimensional properties.
Please find below the cross references.
Do you have an alternative part for 27S3-*S?
Yes, we have our stainless steel stud MTHFTLC-*SK
Please find below the cross references:
For the stud JN0426-05 the
Do you have the countersunk receptacle available 26R6-4BB?
Yes, we have an alternative version available of 26R6-4BB:
MTHRLWC26SK
It has the same dimensions and technical properties as 26R6-4BB.
Anemo Engineering (Alveringem, Belgium) has launched a Japanese website for its "Turnlock"
fastener, which facilitates the fastening and removal of two panels.
What are the TurnLock Ejector spring?
The Turnlock ejector spring provides full retraction of stud assembly to allow opening and closing of equipment without the possibility of jamming or damage.
Can You Supply the part LN29711-1 ?
What can you do about the adjustable receptacle sticking out?
Question:
We have installed on our helicopter:
MTHRA24HSA
MTHWFS
MTHTLC-3S
We are happy about the system, but it seems MTHTLC-3S is too high for our configuration since we needed to adjust receptacle MTHRA24HSA. The threaded part sticks out about 4mm, which seems too much.
The adjustable receptacle would also work with MTHTLC-2S or even MTHTLC-1S.
The biggest issue is that the adjustable receptacle sticks out.
Does Turnlock have the old MS2500 parts available?
Turnlock can supply the alternative Medium duty Tiny Housed Small studs.
They're made according to MS2500.
Is there any way to expedite lead time?
Yes, we can expedite the following parts:
Reason for this is that we can machine these parts by a subcontractor in 2 weeks instead of 16 weeks.
Here is a list of part numbers we can supply by machining:
Does Turnlock have the 26R5-* receptacles available?
The alternative part for 26R5-13 is MTHRSPM26ZY slim panel mount yellow zinc receptacle.
Is there a stainless steel version of the knurled slotted head stud of MTH-series?
Yes there is.
It is made from stainless with electropolished surface, therefore it is rather shiny.
Does Turnlock have old 2800 parts available?
Yes we have these available under our brand MTHB-series or Medium duty Tiny Housed Bearing - series.
Here you can find a list of part numbers:
Here are the Slotted head part numbers:
This is the list of the cross head part numbers:
These are the old part numbers of the Torx headed studs:
All these studs can be used with the MTH receptacles.
To find the exact part number you need, please contact us.
What adjustable receptacles are available?
Turnlock has adjustable receptacles available in 2 series:
1) Medium duty Tiny Housed-series
2) Heavy duty Grommet Retained-series
The MOST important thing about adjustable receptacles is that you can use the same stud length for different panel thicknesses.
How to adjust/install:
By screwing the insert inside the receptacle more in or out, you can adjust the receptacle to work with the stud at your specific panel thickness.
There are regular adjustable and floating adjustable receptacles.
Very interesting to know is that most are also available in Aluminium, which makes them very low weight.
The following adjustable receptacles are available:
There is also a special type of receptalce:
The adjustable threaded receptacle
By screwing this into the prepared tapped hole,
You need to use locktite to fix the receptacle in which you can choose where you install it exactly.
The following adjustable threaded receptacles exist:
The part MTHRAE428S HAS t
Question :
Hi there,
Does chrome plating have a better corrosion resistance than zinc plated parts?
Yes, Chrome plating will have a better corrosion resistance and will be generally better to use in marine environments than zinc.
For example, the part MTHTLK-*C
The results will be pretty close to each other and the thickne
The length of a stud the medium duty tiny housed turnlock MTHTL series is determined according to the assembly that you have and type of receptacle with one of th
The direction of the folding ring handle Turnlock when locked is can be follow:
The interpretation for structural is that any structure such as a fastened panel is critical to the design loads of an airframe. If fasteners fail and
Discover our Aluminium TurnLock parts
These Aluminium parts are typically used in the Aerospace industry.
These parts are available in the MTH-series and the HGR-series.
Both series have the slotted, cross, and ring handles availabe in the High Strength Aluminium parts.
Please use these studs with the following receptacles, which are also all Aluminium parts to have a lower weight:
Please use these studs with the following receptacles, which are also all Aluminium plated to have a lower weight:
How to increase clamping force in a Turnlock Assembly?
In the MTH and HGR series, there exist adjustable receptacles.
HGR-series:
The advantage with this receptacle is that you can put a higher pre-load on the fastener.
Is there an alternative for the folding bail handle HGRTLFB or MTHTLFB?
Yes, TurnLock has developed a new product, namely the Folding ring version:
HGRTLFR-*SK and MTHTLFR-*SK
This product has a much shorter lead time than the old folding bail handle.
Specifically the Folding bail has 14-16 weeks lead time, while the Folding ring only has 4-6 weeks lead time.
HGRTLFB HGRTLFR
MTHTLFB MTHTLFR
The folding ring handle is available in stainless steel, both in the HGR as in the MTH series.
These folding ring handles can also be used instead of the stainless steel wing head versions,
Select your stud by using below table. the amount of protrusion of the receptacle MTHRTA16A or MTHRTA16S
below table is valid only when your upper plate measure = 0mm (which is never the case)
NTA12852 parts can have a leadtime of more then a year and will cost you a fortune. If you are in
What is the clamping force of Turnlock parts?
If you need a quarter turn with a guaranteed clamping force that is repeatable, we suggest to switch to our SPANCLAMPS:
Turnlock fasteners are used into the ISS = International Space Station
we apeared in the local newspaper "Het Nieuwsblad" the 28th of January 2017.
Do you have an alternative for the part 26R3-1?
Yes we do have an alternative for 26R3-1, which is the Turnlock part MTHRPM2HA
When you require a quote for our alternative of 26R3-1, please contact [email protected]
The receptacles Camloc MHSRFWZ, HHSRFWZ and turnlock MTHRFWS are prepared with weld nibs.
Do you have Milspec products?
We have Turnlock parts made according to Milspec products standards.
Milspec products and turnlock have the same mechanical and dimensional properties.
Does there exist a bracket mount to use with the MTH-series?
The new bracket developed for the MPP-series also matches for the MTH-series.
Does there exist a bracket mount to use with the LEG series?
The new bracket developed for the MPP-series also matches for the LEG-series.
Part number is the same though: MPPBPMS
The first thing you'll need to take care off is to select the correct retaining washer.
MTHWFS is a washer which is a lot easier and much faster to install than the MTHWSS:
The cycle number of the TurnLock quarter turn can be repeated more than 15000 times if the assembly instructions are followed.