LOPCPSCTL1010ZBL
- Mon - Fri : 09:00 - 17:00
- [email protected]
LOPCPSCTL1010ZBL
LOPCPSCTL1012ZOR
LOPCPSCTL0810ZGE
LOPCPSCTL1010ZRD
LOPCSCTLH1010SP
LOPCSCTLWO1010ZP
LOPCSCTLW1510ZP
LOPCSCTLKW1010SP
LOPCPTTLWO0810ZP
LOPCPTTLW1010ZP
LOPCPTTLKW1012ZP
LOPCPTTLK1010ZP
Yes, We have installation tools for installing retaining washers of quarter turns.
The difference between hand-operated and tool operated quarter turns, is the
There are a few different types of sealed options assembly for quarter turns.
To make a quarter turn sealed on an assembly, you will typically need to add or incorporate gaskets in the assembly.
How to increase shear strength in the HHS series?
Turnlock has developed a new part to be able to do just that.
By adding an aluminium grommet between the belleville washers and the cross pin,
Turnlock fasteners are a type of mechanical fastener that works by twisting a component into place.
A Turnlock fastener, also known as a quick-action panel fastener or quarter turns, is a fastening device used to join two panels or components together.
Quick question does Turnlock have 120-013 available?
Turnlock can supply the alternative MPP series.
Does Turnlock have the 120-040 Part numbers available?
Turnlock can supply the alternative MPP series.
The 120-040-... is the item code for a set of the MPP series.
Please find below the cross reference table.
Question
Thank you for your feedback.
I have the following question:
The Turnlock series available a
This manufacturer provides his client a time-saving solution by installing Turnlock on their panels.
For a project with a customer with the part number MPTTLK-03-2530S but is not in stock.
Can you supply DON part numbers?
Yes, these parts are available at Turnlock.
The cross reference for these parts are the following:
DON part number | Turnlock part number |
|
For more information, please contact us!
Question:
What is the recommended pitch (distance) between two turnlocks?
What Automotive Fasteners do you have available?
These are the same as our push pull fasteners range.
To receive a quote or a push pull turnlock alternative, please contact us.
These parts have become obsolete.
However we can suggest an alternative Turnlock part number.
Please contact us for an official quote. Minimum order value is 300 USD.
If you were using Oddie Fasteners until recently, then you are undoubtedly looking for the best alternative now. We'd be happy to help you optimize your choice of 1/4 turn fasteners.
The Alconic parts you need are old references.
For the smallest version of The Light duty One Piece Push Turn Close TurnLock series, the reference is LOPPTCTL-1Z the big one is
Yes, this company went went bankrupt.
We have the following series alternatives:
Yes, we supply Steyr alternative parts.
Here is a list of parts we currently hold on stock:
Do you have an alternative for this Monadnock part 1105007-5?
Yes, TurnLock has a direct alternative for the parts of series
Can Turnlock provide the SK27S3-*S parts?
Turnlock can provide the MTHFTLC-*SK parts.
It has the same mechanical and dimensional properties.
Please find below the cross references.
Do you have an alternative part for 27S3-*S?
Yes, we have our stainless steel stud MTHFTLC-*SK
Please find below the cross references:
Is there an alternative part for 214-16SD?
Turnlock can provide the part HGRR33S
It is the exact same part as the 214-16SD part,
For the stud JN0426-05 the
What are extra heavy duty Turnlocks?
Extra heavy duty Turnlocks can carry up to 22000 Newton in tensile strength.
It consists of a stud, which can be a hex head or handle operated, a cross pin and a receptacle:
We received a very nice case story on the usage of HGRRN33BZ and HGRTLS-13Z
The folding ring does not snap into place at the 0° and 90°, but it does not wobble around freely.
Do you have a threaded receptacle for the MHS or HGR series?
Yes, we have a recently developed special receptacle for the MHS and HGR series.
This part is called the MHSRTM16S
It is a stainless steel receptacle that needs to be screwed in to the parent material.
MOQ for this part is 500 pieces with a lead time of 14-16 weeks.
Here are the tables for longer stud lengths
not all the stud length numbers can be made, please consult us.
for plus flush grommets:
Dear Customer.
Your old part has a larger cup size with the same length number 8. The change goes until length 15, the old series have a larger spring cup size.
Is the 710S01-K1-1 still available?
The part number 710S01-K1-1 has become an old part number.
New part number for 710S01-K1-1 is LOPPTTLW15-50PB