Skip to main content

Do you have Turnlocks that can be installed by clinching into the panel?

Self Clinching Turnlocks are minature quarter turn fasteners, there are 3 different series:

1) Light duty One Piece Clinching Push and Turn Turn Lock  = LOPCPTTL

This Clinch Turnlock requires you to push first and then turn the lock to the desired position, To go back to the other position push again do a quarter-turn.

 

headstyle knurled knurled half wing wing offset wing
knob 6000 Aluminiuim plastic cover plastic steel zinc plated & plastic cover steel zinc plated & plastic cover
pin steel zinc plated steel zinc plated steel zinc plated steel zinc plated
spring stainless steel 300 stainless steel 300 stainless steel 300 stainles steel 300
ferrule steel zinc plated steel zinc plated 6000 Aluminum 6000 Aluminum
    rivet: stainless steel 300 buckle: steel zinc plated buckle:steel zinc plated
panel thickness 1.0 1.0 1.0 0.8
frame thickness 1.0 1.2 1.0 1.0

Example: Panel preparation knurled half wing

 

2) Light duty One Piece Clinching Self Close Turn Lock  LOPCSCTL

This Clinching Turnlock will automaticall go the locking position by means of a spring.  This means that if you want to keep the lock in the open position you will have to execute a continuous twisting force which is at the end of the quarter turn to keep it open.  This lock can be also installed so that the fastener is always in the open position, depending on how you prepare your panel.

headstyle knurled half wing wing offset wing handle
knob plastic steel zinc plated & plastic cover steel zinc plated & plastic cover plastic
pin stainless steel 300 steel zinc plated steel zinc plated stainless steel 300
spring stainless steel 300 stainless steel 300 stainless steel 300 stainless steel 300
ferrule stainless steel 300 steel zinc plated steel zinc plated stainless steel 300
  rivet: stainless steel 300     rivet: stainless steel
panel thickness 1.0 1.5 1.0 1.0
frame thickness 1.0 1.0 1.0 -

Example Panel preparation knurled half wing:

3) Light duty One Piece Clinching Push Self Close Turn Lock LOPCPSCTL

This Clinching Turnlock will need to be pressed on top of the head and then it will automatically go to the locking position. To go then back to the open position simply do  a quarter turn. This lock can also be installed so that the fastener requires a push to open and remain in the open position.

they are available in the headstyle: knurled half wing

color panel frame
black 1.0 1.0
orange 1.0 1.2
blue 1.0 1.0
green 0.8 1.0
red 1.0 1.0
     
     

black model

 

 

 

 

color codes for all Clinching Turnlock available from 2500 pieces

BK = Black
PI = Pink
OR = Orange
YE = Yellow
GE = Green
BL = Blue
GR = Grey
PU  = Purple
GO = Gold