| 91S7-15W |
The QuarterTurn part # 91S7-15W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-15WO |
The QuarterTurn part # 91S7-15WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-16 |
The QuarterTurn part # 91S7-16 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-16W |
The QuarterTurn part # 91S7-16W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-16WO |
The QuarterTurn part # 91S7-16WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-17 |
The QuarterTurn part # 91S7-17 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-17W |
The QuarterTurn part # 91S7-17W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-17WO |
The QuarterTurn part # 91S7-17WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-18 |
The QuarterTurn part # 91S7-18 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-18W |
The QuarterTurn part # 91S7-18W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-18WO |
The QuarterTurn part # 91S7-18WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-19 |
The QuarterTurn part # 91S7-19 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-19W |
The QuarterTurn part # 91S7-19W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-19WO |
The QuarterTurn part # 91S7-19WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-20 |
The QuarterTurn part # 91S7-20 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-20W |
The QuarterTurn part # 91S7-20W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-20WO |
The QuarterTurn part # 91S7-20WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-21 |
The QuarterTurn part # 91S7-21 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-21W |
The QuarterTurn part # 91S7-21W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-21WO |
The QuarterTurn part # 91S7-21WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-22 |
The QuarterTurn part # 91S7-22 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-22W |
The QuarterTurn part # 91S7-22W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-22WO |
The QuarterTurn part # 91S7-22WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-23 |
The QuarterTurn part # 91S7-23 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-23W |
The QuarterTurn part # 91S7-23W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-23WO |
The QuarterTurn part # 91S7-23WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-24 |
The QuarterTurn part # 91S7-24 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-24W |
The QuarterTurn part # 91S7-24W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-24WO |
The QuarterTurn part # 91S7-24WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-25 |
The QuarterTurn part # 91S7-25 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-25W |
The QuarterTurn part # 91S7-25W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-25WO |
The QuarterTurn part # 91S7-25WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-26 |
The QuarterTurn part # 91S7-26 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-26W |
The QuarterTurn part # 91S7-26W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-26WO |
The QuarterTurn part # 91S7-26WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-27 |
The QuarterTurn part # 91S7-27 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-27W |
The QuarterTurn part # 91S7-27W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-27WO |
The QuarterTurn part # 91S7-27WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-28 |
The QuarterTurn part # 91S7-28 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-28W |
The QuarterTurn part # 91S7-28W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-28WO |
The QuarterTurn part # 91S7-28WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-29 |
The QuarterTurn part # 91S7-29 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-29W |
The QuarterTurn part # 91S7-29W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-29WO |
The QuarterTurn part # 91S7-29WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-30 |
The QuarterTurn part # 91S7-30 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-30W |
The QuarterTurn part # 91S7-30W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-30WO |
The QuarterTurn part # 91S7-30WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-31 |
The QuarterTurn part # 91S7-31 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-31W |
The QuarterTurn part # 91S7-31W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-31WO |
The QuarterTurn part # 91S7-31WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-32 |
The QuarterTurn part # 91S7-32 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-32W |
The QuarterTurn part # 91S7-32W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-32WO |
The QuarterTurn part # 91S7-32WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-33 |
The QuarterTurn part # 91S7-33 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-33W |
The QuarterTurn part # 91S7-33W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-33WO |
The QuarterTurn part # 91S7-33WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-34 |
The QuarterTurn part # 91S7-34 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-34W |
The QuarterTurn part # 91S7-34W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-34WO |
The QuarterTurn part # 91S7-34WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-35 |
The QuarterTurn part # 91S7-35 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-35W |
The QuarterTurn part # 91S7-35W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-35WO |
The QuarterTurn part # 91S7-35WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-36 |
The QuarterTurn part # 91S7-36 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-36W |
The QuarterTurn part # 91S7-36W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-36WO |
The QuarterTurn part # 91S7-36WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-37 |
The QuarterTurn part # 91S7-37 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-37W |
The QuarterTurn part # 91S7-37W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-37WO |
The QuarterTurn part # 91S7-37WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-38 |
The QuarterTurn part # 91S7-38 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-38W |
The QuarterTurn part # 91S7-38W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-38WO |
The QuarterTurn part # 91S7-38WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-39 |
The QuarterTurn part # 91S7-39 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-39W |
The QuarterTurn part # 91S7-39W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-39WO |
The QuarterTurn part # 91S7-39WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-40 |
The QuarterTurn part # 91S7-40 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-40W |
The QuarterTurn part # 91S7-40W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-40WO |
The QuarterTurn part # 91S7-40WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-41 |
The QuarterTurn part # 91S7-41 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-41W |
The QuarterTurn part # 91S7-41W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-41WO |
The QuarterTurn part # 91S7-41WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-42 |
The QuarterTurn part # 91S7-42 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-42W |
The QuarterTurn part # 91S7-42W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-42WO |
The QuarterTurn part # 91S7-42WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-43 |
The QuarterTurn part # 91S7-43 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-43W |
The QuarterTurn part # 91S7-43W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-43WO |
The QuarterTurn part # 91S7-43WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-44 |
The QuarterTurn part # 91S7-44 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-44W |
The QuarterTurn part # 91S7-44W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-44WO |
The QuarterTurn part # 91S7-44WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-45 |
The QuarterTurn part # 91S7-45 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-45W |
The QuarterTurn part # 91S7-45W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-45WO |
The QuarterTurn part # 91S7-45WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-46 |
The QuarterTurn part # 91S7-46 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-46W |
The QuarterTurn part # 91S7-46W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-46WO |
The QuarterTurn part # 91S7-46WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-47 |
The QuarterTurn part # 91S7-47 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-47W |
The QuarterTurn part # 91S7-47W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-47WO |
The QuarterTurn part # 91S7-47WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-48 |
The QuarterTurn part # 91S7-48 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-48W |
The QuarterTurn part # 91S7-48W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-48WO |
The QuarterTurn part # 91S7-48WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-49 |
The QuarterTurn part # 91S7-49 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-49W |
The QuarterTurn part # 91S7-49W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-49WO |
The QuarterTurn part # 91S7-49WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-5 |
The QuarterTurn part # 91S7-5 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-50 |
The QuarterTurn part # 91S7-50 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-50W |
The QuarterTurn part # 91S7-50W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-50WO |
The QuarterTurn part # 91S7-50WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-51 |
The QuarterTurn part # 91S7-51 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-51W |
The QuarterTurn part # 91S7-51W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-51WO |
The QuarterTurn part # 91S7-51WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-52 |
The QuarterTurn part # 91S7-52 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-52W |
The QuarterTurn part # 91S7-52W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-52WO |
The QuarterTurn part # 91S7-52WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-53 |
The QuarterTurn part # 91S7-53 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-53W |
The QuarterTurn part # 91S7-53W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-53WO |
The QuarterTurn part # 91S7-53WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-54 |
The QuarterTurn part # 91S7-54 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-54W |
The QuarterTurn part # 91S7-54W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-54WO |
The QuarterTurn part # 91S7-54WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-55 |
The QuarterTurn part # 91S7-55 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-55W |
The QuarterTurn part # 91S7-55W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-55WO |
The QuarterTurn part # 91S7-55WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-56 |
The QuarterTurn part # 91S7-56 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-56W |
The QuarterTurn part # 91S7-56W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-56WO |
The QuarterTurn part # 91S7-56WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-57 |
The QuarterTurn part # 91S7-57 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-57W |
The QuarterTurn part # 91S7-57W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-57WO |
The QuarterTurn part # 91S7-57WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-58 |
The QuarterTurn part # 91S7-58 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-58W |
The QuarterTurn part # 91S7-58W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-58WO |
The QuarterTurn part # 91S7-58WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-59 |
The QuarterTurn part # 91S7-59 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-59W |
The QuarterTurn part # 91S7-59W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-59WO |
The QuarterTurn part # 91S7-59WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-5W |
The QuarterTurn part # 91S7-5W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-5WO |
The QuarterTurn part # 91S7-5WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-6 |
The QuarterTurn part # 91S7-6 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-60 |
The QuarterTurn part # 91S7-60 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-60W |
The QuarterTurn part # 91S7-60W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-60WO |
The QuarterTurn part # 91S7-60WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-6W |
The QuarterTurn part # 91S7-6W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-6WO |
The QuarterTurn part # 91S7-6WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-7 |
The QuarterTurn part # 91S7-7 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-7W |
The QuarterTurn part # 91S7-7W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-7WO |
The QuarterTurn part # 91S7-7WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-8 |
The QuarterTurn part # 91S7-8 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-8W |
The QuarterTurn part # 91S7-8W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-8WO |
The QuarterTurn part # 91S7-8WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-9 |
The QuarterTurn part # 91S7-9 is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-9W |
The QuarterTurn part # 91S7-9W is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 91S7-9WO |
The QuarterTurn part # 91S7-9WO is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 991R2-1AF |
The QuarterTurn part # 991R2-1AF is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 991R2-1AGV |
The part 991R2-1AGV is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991R2-1BP |
The part 991R2-1BP is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991R2-2AR |
The part 991R2-2AR is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991R2-2AZ |
The part 991R2-2AZ is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991R2-3AF |
The QuarterTurn part # 991R2-3AF is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 991R2-3AGV |
The part 991R2-3AGV is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991R2-3ASNV |
The part 991R2-3ASNV is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991R2-3BP |
The part 991R2-3BP is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991R2-5AR |
The part 991R2-5AR is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991R2-5AZ |
The part 991R2-5AZ is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991R3-1AF |
The QuarterTurn part # 991R3-1AF is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 991R6-1AK7 |
The part 991R6-1AK7 is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991R6-2AK7 |
The part 991R6-2AK7 is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-1-1AF |
The QuarterTurn part # 991S01-1-1AF is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 991S01-1-1AGV |
The part 991S01-1-1AGV is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-1-1BP |
The part 991S01-1-1BP is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-10-1AF |
The QuarterTurn part # 991S01-10-1AF is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 991S01-10-1AGV |
The part 991S01-10-1AGV is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-10-1BP |
The part 991S01-10-1BP is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-11-1AF |
The QuarterTurn part # 991S01-11-1AF is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 991S01-11-1AGV |
The part 991S01-11-1AGV is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-11-1BP |
The part 991S01-11-1BP is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-12-1AF |
The QuarterTurn part # 991S01-12-1AF is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 991S01-12-1AGV |
The part 991S01-12-1AGV is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-12-1BP |
The part 991S01-12-1BP is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-13-1AF |
The QuarterTurn part # 991S01-13-1AF is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 991S01-13-1AGV |
The part 991S01-13-1AGV is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-13-1BP |
The part 991S01-13-1BP is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-14-1AF |
The QuarterTurn part # 991S01-14-1AF is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 991S01-14-1AGV |
The part 991S01-14-1AGV is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-14-1BP |
The part 991S01-14-1BP is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-15-1AF |
The QuarterTurn part # 991S01-15-1AF is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 991S01-15-1AGV |
The part 991S01-15-1AGV is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-15-1BP |
The part 991S01-15-1BP is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-16-1AF |
The QuarterTurn part # 991S01-16-1AF is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 991S01-16-1AGV |
The part 991S01-16-1AGV is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-16-1BP |
The part 991S01-16-1BP is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-17-1AF |
The QuarterTurn part # 991S01-17-1AF is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 991S01-17-1AGV |
The part 991S01-17-1AGV is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-17-1BP |
The part 991S01-17-1BP is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-18-1AF |
The QuarterTurn part # 991S01-18-1AF is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 991S01-18-1AGV |
The part 991S01-18-1AGV is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-18-1BP |
The part 991S01-18-1BP is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-19-1AF |
The QuarterTurn part # 991S01-19-1AF is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
| 991S01-19-1AGV |
The part 991S01-19-1AGV is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-19-1BP |
The part 991S01-19-1BP is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 991S01-2-1AF |
The QuarterTurn part # 991S01-2-1AF is an old part number for Anemo. This part is old style yellow Chromate plated. You will need to switch to the new clear zinc plated reference, that has the same mechanical characteristics as the old part. The change to the new part number was necessary to reflect the new plating which is better corrosion resistant. The new ROHS conform reference is: |
