| 214-16 |
The part 214-16 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 214-16D |
The part 214-16D is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 214-16E |
The part 214-16E is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 214-16G |
The part 214-16G is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. |
| 214-16GN |
The part 214-16GN is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. |
| 214-16N |
The part 214-16N is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 214-16ND |
The part 214-16ND is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 214-16S |
The part 214-16S is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 214-16SD |
The part 214-16SD is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 244-16 |
The part 244-16 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 244-16C |
The part 244-16C is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 244-16CD |
The part 244-16CD is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 244-16D |
The part 244-16D is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 244-16E |
The part 244-16E is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 244-16G |
The part 244-16G is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. |
| 244-16GC |
The part 244-16GC is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. |
| 244-16S |
The part 244-16S is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 244-16SC |
The part 244-16SC is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 244-16SCD |
The part 244-16SCD is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 244-16SD |
The part 244-16SD is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 244-22 |
The part 244-22 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 244-22C |
The part 244-22C is an Encapsulated floating receptacle Type A. This Part is costly and not ROHS conform and has a very long lead time up to 42 weeks. We strongly recommend to switch to the alternative stock available Turnlock Part: |
| 244-22D |
The part 244-22D is a Floating receptacle Type B. This Part is costly and not ROHS conform and has a very long lead time up to 42 weeks. We strongly recommend to switch to the alternative stock available Turnlock Part: |
| 244-22E |
The part 244-22E is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 244-22F |
The part 244-22F is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 244-22S |
The part 244-22S is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 244-22SD |
The part 244-22SD is a Floating receptacle Type B. This Part is costly and not ROHS conform and has a very long lead time up to 42 weeks. We strongly recommend to switch to the alternative stock available Turnlock Part: |
| 4002-0 |
The part 4002-0 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-0-1 |
The part 4002-0-1 is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-0S |
The part 4002-0S is an old Part number for Anemo. We strongly recommend to switch to the alternative stock available: |
| 4002-1 |
The part 4002-1 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-10 |
The part 4002-10 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-10D |
The part 4002-10D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-10S |
The part 4002-10S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-10SW |
The part 4002-10SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-10W |
The part 4002-10W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-10WB |
The part 4002-10WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-11 |
The part 4002-11 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-11D |
The part 4002-11D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-11S |
The part 4002-11S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-11SW |
The part 4002-11SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-11W |
The part 4002-11W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-11WB |
The part 4002-11WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-12 |
The part 4002-12 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-12D |
The part 4002-12D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-12S |
The part 4002-12S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-12SW |
The part 4002-12SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-12W |
The part 4002-12W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-12WB |
The part 4002-12WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-13 |
The part 4002-13 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-13D |
The part 4002-13D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-13S |
The part 4002-13S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-13SW |
The part 4002-13SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-13W |
The part 4002-13W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-13WB |
The part 4002-13WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-14 |
The part 4002-14 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-14D |
The part 4002-14D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-14S |
The part 4002-14S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-14SW |
The part 4002-14SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-14W |
The part 4002-14W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-14WB |
The part 4002-14WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-15 |
The part 4002-15 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-15D |
The part 4002-15D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-15S |
The part 4002-15S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-15SW |
The part 4002-15SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-15W |
The part 4002-15W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-15WB |
The part 4002-15WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-16 |
The part 4002-16 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-16D |
The part 4002-16D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-16S |
The part 4002-16S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-16SW |
The part 4002-16SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-16W |
The part 4002-16W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-16WB |
The part 4002-16WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-17 |
The part 4002-17 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-17D |
The part 4002-17D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-17S |
The part 4002-17S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-17SW |
The part 4002-17SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-17W |
The part 4002-17W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-17WB |
The part 4002-17WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-18 |
The part 4002-18 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-18D |
The part 4002-18D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-18S |
The part 4002-18S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-18SW |
The part 4002-18SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-18W |
The part 4002-18W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-18WB |
The part 4002-18WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-19 |
The part 4002-19 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-19D |
The part 4002-19D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-19S |
The part 4002-19S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-19SW |
The part 4002-19SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-19W |
The part 4002-19W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-19WB |
The part 4002-19WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-1D |
The part 4002-1D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-1S |
The part 4002-1S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-1SW |
The part 4002-1SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-1W |
The part 4002-1W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-1WB |
The part 4002-1WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-2 |
The part 4002-2 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-20 |
The part 4002-20 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-20D |
The part 4002-20D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-20S |
The part 4002-20S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-20SW |
The part 4002-20SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-20W |
The part 4002-20W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-20WB |
The part 4002-20WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-21 |
The part 4002-21 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-21D |
The part 4002-21D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-21S |
The part 4002-21S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-21SW |
The part 4002-21SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-21W |
The part 4002-21W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-21WB |
The part 4002-21WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-22 |
The part 4002-22 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-22D |
The part 4002-22D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-22S |
The part 4002-22S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-22SW |
The part 4002-22SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-22W |
The part 4002-22W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-22WB |
The part 4002-22WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-23 |
The part 4002-23 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-23D |
The part 4002-23D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-23S |
The part 4002-23S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-23SW |
The part 4002-23SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-23W |
The part 4002-23W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-23WB |
The part 4002-23WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-24 |
The part 4002-24 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-24D |
The part 4002-24D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-24S |
The part 4002-24S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-24SW |
The part 4002-24SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-24W |
The part 4002-24W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-24WB |
The part 4002-24WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-25 |
The part 4002-25 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-25D |
The part 4002-25D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-25S |
The part 4002-25S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-25SW |
The part 4002-25SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-25W |
The part 4002-25W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-25WB |
The part 4002-25WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-26 |
The part 4002-26 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-26D |
The part 4002-26D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-26S |
The part 4002-26S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-26SW |
The part 4002-26SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-26W |
The part 4002-26W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-26WB |
The part 4002-26WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-27 |
The part 4002-27 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-27D |
The part 4002-27D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-27S |
The part 4002-27S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-27SW |
The part 4002-27SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-27W |
The part 4002-27W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-27WB |
The part 4002-27WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-28 |
The part 4002-28 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-28D |
The part 4002-28D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-28S |
The part 4002-28S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-28SW |
The part 4002-28SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-28W |
The part 4002-28W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-28WB |
The part 4002-28WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-29 |
The part 4002-29 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-29D |
The part 4002-29D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-29S |
The part 4002-29S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-29SW |
The part 4002-29SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-29W |
The part 4002-29W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-29WB |
The part 4002-29WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-2D |
The part 4002-2D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-2S |
The part 4002-2S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-2SW |
The part 4002-2SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-2W |
The part 4002-2W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-2WB |
The part 4002-2WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-3 |
The part 4002-3 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-30 |
The part 4002-30 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-30D |
The part 4002-30D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-30S |
The part 4002-30S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-30SW |
The part 4002-30SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-30W |
The part 4002-30W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-30WB |
The part 4002-30WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-31 |
The part 4002-31 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-31D |
The part 4002-31D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-31S |
The part 4002-31S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-31SW |
The part 4002-31SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-31W |
The part 4002-31W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-31WB |
The part 4002-31WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-32 |
The part 4002-32 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-32D |
The part 4002-32D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-32S |
The part 4002-32S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-32SW |
The part 4002-32SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-32W |
The part 4002-32W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-32WB |
The part 4002-32WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-33 |
The part 4002-33 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-33D |
The part 4002-33D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-33S |
The part 4002-33S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-33SW |
The part 4002-33SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-33W |
The part 4002-33W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-33WB |
The part 4002-33WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-34 |
The part 4002-34 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-34D |
The part 4002-34D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-34S |
The part 4002-34S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-34SW |
The part 4002-34SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-34W |
The part 4002-34W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-34WB |
The part 4002-34WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-35 |
The part 4002-35 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-35D |
The part 4002-35D is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-35S |
The part 4002-35S is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-35SW |
The part 4002-35SW is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-35W |
The part 4002-35W is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
| 4002-35WB |
The part 4002-35WB is an old Part number for Anemo. You will need to switch to the new reference, that has the same mechanical and dimensional characteristics as the old part, it is merely a part number change reflecting the new plating which is better corrosion resistant. The cup size has been altered by the new production method, but it is fully interchangeable with the old part. You need to switch to part: |
| 4002-36 |
The part 4002-36 is a cadmium plated and not in accordance with the European RoHS regulation. We strongly recommend to switch to the alternative RoHS conform stock available: |
